     |
||
Product Selection
You are here: Home > Products > Breathing Systems > ITU Breathing Circuits
Learn more about Breathing Systems
ITU Breathing Circuits
Low Compliance with reduced pressure and drag on the patient
Low compliance ventilator tubes are made with a high density flexible co-polymer, providing compliance to a level which is required for use in ventilated patients.
Easy to manage
The parallel Y piece allows for a greater control of the system. The double walled, 22mm M/15mm F patient end connection allows for ease of fitting to Catheter Mounts, Endotracheal Tubes, Laryngeal Masks, Face Masks or Elbows.
The frosted connection check marks on the connector on the patient side of the Y piece allows visual inspection confirming secure attachment.
Easy and secure fitting
22mm F serrated connectors providing a secure fitting to the machine. Secure hand grip enabling easy removal from the machine. Soft, lightweight and flexible material ensures a secure seal while still allowing ease of connection and disconnection.
Maximised Water Collection
Self sealing water trap will close when the receiver is removed for contents discharge hence securing ventilation pressure. The dual action valve inside the water trap prevents condensate flowing back into the system should the container be moved from it's vertical position.
Vertical inlet ports enhance gravity induced flow of condensate, maximising water collection from the circuit.
Low compliance ventilator tubes are made with a high density flexible co-polymer, providing compliance to a level which is required for use in ventilated patients.
Easy to manage
The parallel Y piece allows for a greater control of the system. The double walled, 22mm M/15mm F patient end connection allows for ease of fitting to Catheter Mounts, Endotracheal Tubes, Laryngeal Masks, Face Masks or Elbows.
The frosted connection check marks on the connector on the patient side of the Y piece allows visual inspection confirming secure attachment.
Easy and secure fitting
22mm F serrated connectors providing a secure fitting to the machine. Secure hand grip enabling easy removal from the machine. Soft, lightweight and flexible material ensures a secure seal while still allowing ease of connection and disconnection.
Maximised Water Collection
Self sealing water trap will close when the receiver is removed for contents discharge hence securing ventilation pressure. The dual action valve inside the water trap prevents condensate flowing back into the system should the container be moved from it's vertical position.
Vertical inlet ports enhance gravity induced flow of condensate, maximising water collection from the circuit.
A wide range of ITU Breathing Systems are offered to match your individual requirements.
Heated Wires
Each heated wire system is tested to ensure it meets the required resistance level. Compatible with most commonly used humidifiers and ventilators complying with the required standards.
Each heated wire system is tested to ensure it meets the required resistance level. Compatible with most commonly used humidifiers and ventilators complying with the required standards.
Pack of 20
Standard Ventilator System with limb (1.6 metre). 22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + 0.8m F/F limb + spare 22mm M connectors
038-01-135
PACK SIZE
DESCRIPTION
PRODUCT CODE
Pack of 20
Standard Ventilator System (2.4 metre)
22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + spare 22mm M connectors
22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + spare 22mm M connectors
038-01-132
038-01-130
Standard Ventilator System (1.6 metre)
Pack of 20
038-01-140
Ventilator Breathing System with Monitoring Ports (1.6 metre). 22mm lightweight low compliance corrugated tube with parallel Y piece with 2 monitoring ports, 22mm F connectors + 0.8m F/F limb + spare 22mm M connectors
Pack of 20
038-01-150
Ventilator Breathing System with Monitoring Ports and one Water Trap (1.6 metre).
22mm lightweight, low compliance corrugated tube with parallel Y piece with 2 monitoring ports, 22mm F connectors, one self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
22mm lightweight, low compliance corrugated tube with parallel Y piece with 2 monitoring ports, 22mm F connectors, one self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
Pack of 20
038-01-155
Ventilator Breathing System with Monitoring Ports and two Water Traps (1.6 metre).
22mm lightweight, low compliance corrugated tube with parallel Y piece with 2 monitoring ports, 22mm F connectors, two self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
22mm lightweight, low compliance corrugated tube with parallel Y piece with 2 monitoring ports, 22mm F connectors, two self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
Pack of 20
038-01-160
Heated Wire Breathing System with Water Trap and Monitoring Ports (1.6 metre).
22mm lightweight, low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors, self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
22mm lightweight, low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors, self sealing water trap + 0.8m F/F limb + spare 22mm M connectors
Pack of 20
038-01-163
As above with Cloverleaf end connector
Pack of 20
038-01-161
Dual Heated Wire Breathing System
(1.6 metre) with Y piece and Monitoring Ports
(1.6 metre) with Y piece and Monitoring Ports
Pack of 20
038-01-164
As above with Cloverleaf end connector
Pack of 20
