Airway Management

The range are specically designed with low compliance tubes for patients requiring ventilation in Intensive Care Units. The range of
circuits and accessories offer a full range to meet the demands of patients from standard ventilator circuits to heated wire circuits and
humidication chambers. A wide variety of ITU Breathing Systems are offered to meet individual requirements.

Easy to Manage
The parallel Y piece allows for a greater control of the system. The double walled, 22mm M/15mm F patient end connection allows for ease of fitting to Catheter Mounts, Endotracheal Tubes, Laryngeal Masks, Face Masks or Elbows.

The frosted connection check marks on the connector on the patient side of the Y piece allows for visual inspection, confirming secure attachment.

Low Compliance with reduced
Pressure and Drag on the Patient
Low compliance ventilator tubes are made with a high density flexible co-polymer, providing compliance to a level which is required for use with ventilated patients.

Heated Wires
Each heated wire system is tested to ensure it meets the required resistance level.

Maximised Water Collection
Self sealing water trap will close when the receiver is removed for contents discharge, hence securing ventilation pressure. The dual action valve inside the water trap prevents collected water flowing back into the system should the container be moved from it's vertical position. Vertical inlet ports enhance gravity induced flow of condensate, maximising water collection from the circuit.

Easy and Secure Fitting

22mm F serrated connectors providing a secure fitting to the machine. Secure hand grip enables easy removal from the machine. Soft, lightweight and flexible material ensures a secure seal while still allowing ease of connectionand disconnection.

Flying Lead Connection (standard):

Clover Leaf Connection:

Compatibility
These circuits are available with two types of heated wire connection, (Flying Lead and Clover Leaf) allowing compatibility with Fisher & Paykel™ and the most commonly used humidifiers and ventilators complying with the required standards.

Product Code	Description	Pack Size	Image

038-01-130	Standard Ventilator Breathing System (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + spare 22mm M/M connector	20

038-01-132	Standard Ventilator Breathing System (2.4m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + spare 22mm M/M connector	20

038-01-135	Standard Ventilator Breathing System with limb (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 22mm F connectors + 0.8m F/F limb + spare 22mm M/M connector	20

038-01-140	Standard Ventilator Breathing System with Monitoring Ports (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 2 monitoring ports, 22mm F connectors + 0.8m F/F limb + spare 22mm M/M connector	20

038-01-150	Standard Ventilator Breathing System with Monitoring Ports and one Water Trap (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 2 monitoring ports, 22mm F connectors, one self sealing water trap + 0.8m F/F limb + spare 22mm M/M connector	20

038-01-155	Standard Ventilator Breathing System with Monitoring Ports and two Water Traps (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 2 monitoring ports, 22mm F connectors, 2 self sealing water traps + 0.8m F/F limb + spare 22mm M/M connector	20

038-01-155F	Standard Ventilator Breathing System with In-Line T-Piece Valve and MaxiNeb Nebuliser (1.6m) 22mm lightweight low compliance corrugated tube with parallel Y piece and 2 monitoring ports, In-Line Nebuliser and Valve, 22mm F connectors, two self sealing water traps + 0.8m F/F limb + spare 22mm M/M connector	20

038-01-160	Heated Wire Breathing System with Water Trap and Monitoring Ports (1.6m) 22mm lightweight low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors, self sealing water trap + 0.8m F/F limb + spare 22mm M/M connector. Flying Lead Connection.	20

038-01-163	Heated Wire Breathing System with Water Trap and Monitoring Ports (1.6m) 22mm lightweight low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors, self sealing water trap + 0.8m F/F limb + spare 22mm M/M connector. Clover Leaf Connection.	20

038-01-161	Dual Heated Wire Breathing System (1.6m) 22mm lightweight low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors + 0.8m F/F limb + spare 22mm M/M connector. Flying Lead Connection.	20

038-01-164	Dual Heated Wire Breathing System (1.6m) 22mm lightweight low compliance, heat resistant corrugated tube with parallel Y piece, two monitoring ports, 22mm F connectors + 0.8m F/F limb + spare 22mm M/M connector. Clover Leaf Connection.	20

Airway Management

LarySeal

Reusable Laryngoscopes

Single Patient Use Laryngoscopes

ET Tubes

Stylets and Bougies

Airways

Anaesthesia Breathing Systems

Adult Anaesthetic Circuits

Paediatric Anaesthesia Circuits

Catheter Mounts

Anaesthetic Face Masks

Anaesthesia Components

Critical Care

Neonatal Breathing Systems

Breathing Filters

Oxygen & Aerosol Therapy

Fixed Concentration

Variable Concentration

Post Operative

Aerosol Therapy

Resuscitation

Suction

Urology & Continence Care

FlexiCath

Drainage Bags

Accessories

Home Packs

Colostomy

Coloset Closed and Drainable - Two Piece Range

Enema Tips

ICU Ventilator Systems